Re: [SystemSafety] FMEA draft international standard

From: RICQUE Bertrand (SAGEM DEFENSE SECURITE) < >
Date: Wed, 16 Jul 2014 10:43:42 +0200


I dont' know what is the value of the German translation, but here in France we have an interesting issue.

Until recently, IEC was publishing the standards in French and English as these are the two official languages of IEC. IEC was taking care of the translations and the (french) committee members were reviewing the French translation in the same way as the English version before release within the frame of their work in the committee. From a French perspective this process has 2 interesting aspects:

Now the French standardisation body, AFNOR, struggling to find some money to survive, has obtained the right to sell standards they have themselves translated. So they started translating, for instance IEC 61511, BEFORE CDV, and without any review by the committee experts (who don't want to do twice the job on an unstable document and to take any responsibility on the content of the text that the standardisation body does not want to take either ...).

This is going very soon to result in 2 different IEC standards in French. The odd is that they have translated parts that were unchanged from the previous edition (they just had to copy and paste) or have translated part that were originating from French material. The result is rather funny looking more or less like a Google Translator product !

I thus prefer to stick to the English original version.

If some among you speak French and want to have some fun just read the text. You will find things such as "shadow processor" translated by "processeur de l'ombre".

I thus prefer to stick to the English original version.

Bertrand Ricque

Program Manager

Optronics and Defence Division

Sights Program

Mob : +33 6 87 47 84 64

Tel : +33 1 58 11 96 82

Bertrand.ricque_at_xxxxxx

-----Original Message-----
From: systemsafety-bounces_at_xxxxxx Sent: Wednesday, July 16, 2014 9:54 AM
To: systemsafety_at_xxxxxx Subject: Re: [SystemSafety] FMEA draft international standard

On 2014-07-15 21:16 , Barrie Reynolds wrote:

> PBL said

>> But getting such a process underway is not trivial. First, people have to obtain a copy of the CD.

>

> The UK committee is BSI DS/1

> Members of the supporting organisations should obtain a copy direct

> from their representative on DS/1 The Supporting organisations are at the bottom of the page at:

> https://standardsdevelopment.bsigroup.com/Home/Committee/50001626

If I may take the opportunity to use Barrie's helpful message for a purpose for which it was not intended.....

I am very concerned, as are other colleagues, about the restrictive practices involved in standards development. There are two sides to it.

One is that some form of organisation is required, resources for any activity have to be sourced, especially an activity such as codifying the state of the art in a specific technology while controlling as far as possible for special interests, and the world is a very complicated place.

Another is that the sum total of practices discourage much participation in the endeavor, and the results suffer technically. Many standards in some areas are unnecessarily technically poor.

For example, John Knight has complained publicly that he cannot obtain copies of standards to which he has himself contributed as a committee member without paying out large sums of money to which he does not have access in his academic role. And his students thereby cannot study them. He is right.

Almost all academia is hindered from using actual - even past - standards in their teaching, at least in the area in which I work. That seems to be absurd if the standards' claim to codify current state of the art is true.

Some national standards organisations do make provision for this. In Germany, a flat-rate subscription somewhat less than the current cost of a leading journal buys an organisation access to any German standards relevant to its area of interest. So I could get anything produced by IEC SC 65A (the functional system safety people) or IEC TC 56 (the Dependability people, which in the IEC definition does not include safety, although in the IFIP glossary - Laprie, Randell and co - it

does) - but only in its German translation (to which the responsible national standards organisation DKE has copyright - the official German standard is the translation of the IEC one).

Then there is the business of soliciting input and commentary from those with expertise who are not involved in development.

BSI appears to distinguish two phases, a Committee Draft and a Draft for Public Comment. The proposed IEC 60812 is not available as a Draft for Public Comment on the BSI WWW site. The German DKE does not distinguish such phases, as far as I know. A Committee Draft is made available to any who have registered a legitimate interest in the work of a given committee (the German correspondent to BSI DS/1 is DKE K132). Registering an interest is open to anyone, and you will be accepted if it looks as if you work in the field or a related field, and often even if you don't.

For example, I imagine any member of the VDE (the German electrotechnical engineering organisation) would be enabled to register an interest in any standards area for which DKE is responsible. Whereas I note that the British equivalent, the IET, is not a supporting organisation of DS/1, so you don't get to comment on the 60812 CD merely through being an IET member with an interest. (Incidentally, I find it very odd that the IET is not. I think we should fix that. HAZOP and FMEA and FTA and ETA, let alone Markov modelling and so on are important to electrotechnical engineers!)

IEC CDs, NWIPs and so on are distributed, and comments are requested - commentary is expected to be solicited by those who have registered an interest. So for example I gave a recent CD of another standard to a particularly talented student for commentary; he sent in extensive (and worthwhile) comments, which were forwarded to the IEC MT (though had not been addressed by the time I resigned my MT membership, which was at the time that the subsequent CD was being distributed - one procedural anomaly amongst many, which is why I resigned) and he was invited to participate in the subsequent K 132 meeting. Comments are sent direct to the named German Representative on the IEC Technical Committee (each participating country has just one Representative on a TC; this is a different role from that of participating in a specific Project Team or Maintenance Team, which is nominally not tied to nationality).

So I regard the German regime as appropriately technically liberal in this regard; the British and US ones much less so.

Then there is the matter of affordances/hindrances, to use the Nielsen/Norman terminology.

As I mentioned, the IEC (and by transitivity the national standards organisations) only accept comments on their comments form. This is commendably targeted in that it requires not only a general comment (usually expressing a criticism) but also a specific proposed change, and has a column for committee response. Formally, a committee response to each comment is required. The "committee" of first instance here will often be the national committee, which will decide which comments to forward to the IEC PT/MT. The affordance here is that comments get logged and responded to in a traceable manner.

*But* the form is in a proprietary document-preparation format, and is not formatted for easy use on the screens of computers which most of us use. I just got a brand-new Apple MacBook Pro, which renders the file automatically using its own doc-prep SW Pages, and it is as usual all over the place. I can of course deal with that and will. But I am involved in standardisation work, and many people whom we hope will comment are not. Many of them are not going to take the half-hour to couple of hours to configure their computers just to use a form. It's a hindrance.

What happens in Germany is that free-form comments are de facto accepted, and someone usually volunteers to wedge them into the IEC format for further consideration, all very informal. As far as I know, that doesn't seem to happen in Britain.

All in all, a reverse of the usual cultural stereotypes. :-)

John is concerned about access to standards and standards development for engineering students, as am I (but as I mentioned, we have some sort of a solution, at least for IEC and ISO although not for RTCA or EUROCAE, in Germany). I am very concerned about the technical quality of published standards in our area, as is John, because it so often is poor. I think FDISs (the final draft standard) should be subject to eminent-peer review. I think the EU project regime here is quite effective.

Named outside reviewers who engage face-to-face with representatives of the Project Team and who have final say on whether Deliverables (documents and SW) are accepted. (It is more effective than academic-style anonymous reviewing, because *everybody's* reputation is publicly on the line at every step. For reviewers to miss things is just as consequential as for the PT to miss things.) Resourcing this is an issue, but one imagines that the IEC could find a way from the kinds of four-figure sums it charges for the likes of IEC 61508.

John's paper at SSS2014 is available at

http://scsc.org.uk/paper_126/protect_reg_01-Knight.pdf?pap=933 . I have a White Paper on it from a year ago at http://www.rvs.uni-bielefeld.de/publications/WhitePapers/RVSsfssPrinciples.pdf

PBL Prof. Peter Bernard Ladkin, Faculty of Technology, University of Bielefeld, 33594 Bielefeld, Germany

Tel+msg +49 (0)521 880 7319 www.rvs.uni-bielefeld.de<http://www.rvs.uni-bielefeld.de>


The System Safety Mailing List

systemsafety_at_xxxxxx

#
" Ce courriel et les documents qui lui sont joints peuvent contenir des informations confidentielles, être soumis aux règlementations relatives au contrôle des exportations ou ayant un caractère privé. S'ils ne vous sont pas destinés, nous vous signalons qu'il est strictement interdit de les divulguer, de les reproduire ou d'en utiliser de quelque manière que ce soit le contenu. Toute exportation ou réexportation non autorisée est interdite Si ce message vous a été transmis par erreur, merci d'en informer l'expéditeur et de supprimer immédiatement de votre système informatique ce courriel ainsi que tous les documents qui y sont attachés."



" This e-mail and any attached documents may contain confidential or proprietary information and may be subject to export control laws and regulations. If you are not the intended recipient, you are notified that any dissemination, copying of this e-mail and any attachments thereto or use of their contents by any means whatsoever is strictly prohibited. Unauthorized export or re-export is prohibited. If you have received this e-mail in error, please advise the sender immediately and delete this e-mail and all attached documents from your computer system." #


The System Safety Mailing List
systemsafety_at_xxxxxx Received on Wed Jul 16 2014 - 10:44:00 CEST

This archive was generated by hypermail 2.3.0 : Tue Jun 04 2019 - 21:17:06 CEST